Table of Contents
Advertisement
3
Take out the docomo nano UIM card from the
tray
4
Keep the terminal in a horizontal state and
firmly insert the tray straight into the end of the
slot
→
P.25
5
Fit the tray in
･
Firmly press so that the tray and the main body are in the same
plane (no difference in level).
Information
◆
･
Please be careful not to touch or scratch the IC when you handle
the docomo nano UIM card. Also, be aware that trying to insert or
remove the docomo nano UIM card with excessive force may cause
it to break.
･
Do not draw/insert the docomo nano UIM card/microSD card tray
forcibly. Doing so may damage the tray.
･
If the SIM ejector is lost or damaged, you can use a paper clip
instead.
microSD card
microSD card
･
The terminal supports microSD card of up to 2 GB, microSDHC
card and microSDHC UHS-I card of up to 32 GB, microSDXC card
and microSDXC UHS-I card of up to 256 GB (as of December,
2017).
･
Note that DOCOMO does not guarantee actual operations of all
microSD cards. For compatible microSD cards, contact
manufacturers of microSD cards.
･
A microSDXC card can be used only on a compatible device.
Inserting a microSDXC card into a non-microSDXC-compatible
device may damage or destroy data saved on the microSDXC card.
Do not insert one. If you want to reuse a microSDXC card on which
data is destroyed, format microSDXC card (all data will be erased)
on an SDXC compatible device.
･
When copying data to/from a non-SDXC-compatible device, use a
microSDHC card or microSD card complying with standards of
device to share data.
26
Before Using the Terminal
Advertisement
Table of Contents
