Table of Contents
Advertisement
・
Make sure to use the terminal without applying excessive
force.
Putting the terminal in a bag full of items or sitting down with the
terminal in a pocket of your clothes may cause malfunction or
damage of the display, internal circuit board, internal battery, etc.
Also, doing so while the external device is connected to the external
connection jack may cause malfunction or damage.
・
Use optional accessories specified by NTT DOCOMO.
Using unspecified accessories may cause a malfunction or
damage.
・
Read the user's manuals supplied with the optional
accessories.
・
Do not let the terminal or the accessory fall or do not give a
strong impact to it.
Doing so may cause a malfunction or damage.
The terminal precautions
・
Do not press the display strongly or do not use sharp-
pointed object when operating.
The display may get scratched and it may cause malfunction or
damage.
・
Avoid using the terminal in extremely hot or cold places.
Use the terminal in a place where temperature ranges between 0
and 35
℃
and humidity ranges between 5 and 95% (non-
condensed).
・
The terminal may affect land-line phones, TVs or radios in
use nearby, so use it as far as possible from these
appliances.
・
Be sure to back up the data you saved in the terminal on a
microSD card, PC, or cloud service, or keep a separate note.
NTT DOCOMO is not liable for any loss of saved data.
・
Do not insert the plug of external device to the external
connection jack at a slant when connecting. Or, do not pull
the plug when they are connected.
Doing so may cause a malfunction or damage.
・
It is normal for the terminal to become warm during use or
charging. Continue to use it.
・
Do not leave the camera lens under direct sunlight.
If you do so, some of the elements may melt or become faded.
・
Usually keep the docomo nano UIM card/microSD card tray
closed during use.
Failure to do so may allow liquids such as water (drinking water,
sweat, seawater, urine of pet animals, etc.) or foreign objects such
as dust to enter inside and cause a malfunction.
・
Do not give a strong impact to the fingerprint sensor or
scratch the surface.
Doing so may cause not only malfunction of the fingerprint sensor,
but also failure of authentication.
・
While microSD card is being used, do not take the card out
and do not turn off the terminal.
Doing so may cause data loss or malfunction.
・
Do not let a magnetic card or magnetized object close to or
get caught in the terminal.
The magnetic data in cash cards, credit cards, telephone cards,
floppy disks, etc. may be erased.
Bringing strong magnetism near may cause malfunction of the
terminal.
・
Do not decorate the terminal with films or stickers.
Doing so may cause the functions that use the proximity sensor to
malfunction.
For the position of the proximity sensor, refer to the following.
→
P.21 "Part names and functions"
16
Contents/Precautions
Advertisement
Table of Contents
