Table of Contents
Advertisement
2
Draw the tray straight
3
With the IC side facing up, set the docomo
nano UIM card into the tray
･
Be sure to fit the docomo nano UIM card into the tray so that it
does not shift.
Notch
IC
4
Keep the terminal in a horizontal state and
firmly insert the tray straight into the end of the
slot
･
Be careful not to insert the tray with the wrong face up.
Incorrect insertion may cause malfunction or damage.
5
Fit the tray in
･
Firmly press so that the tray and the main body are in the same
plane (no difference in level).
Removing
1
Insert the tip of SIM ejector into the hole for
ejecting the tray
2
Draw the tray straight
25
P.24
→
P.25
→
Before Using the Terminal
Advertisement
Table of Contents
