Docomo Nano Uim Card - Zte M Z-01K Instruction Manual

docomo nano UIM card

The docomo nano UIM card is an IC card recorded user
information such as phone number etc.
･
You can use the terminal only with a docomo nano UIM card. If you
have a docomo mini UIM card, docomo UIM card, or FOMA card,
bring it to a docomo Shop to replace it with a docomo nano UIM
card.
･
When the docomo nano UIM card is not installed to the terminal,
some functions such as making/receiving calls, sending/receiving
messages (SMS) and packet communication are not available.
･
If the tray with the docomo nano UIM card is drawn/inserted when
the terminal is powered on, the terminal restarts.
･
For details on the docomo nano UIM card, refer to the docomo
nano UIM card manual or NTT DOCOMO website.
Security code for docomo nano UIM card
The docomo nano UIM card has a security code called a PIN code.
→ P.103
Installing/Removing docomo nano UIM
card
･
Install/remove after turning off the power.
･
To remove the tray, use the included SIM ejector (sample).
Installing
1
Insert the tip of SIM ejector into the hole for
ejecting the tray
･
Firmly insert it straight until the tray comes out. Failure to insert
it straight may cause malfunction or damage.
24
Before Using the Terminal