Autolift Transformer Replacement (If Applicable); Autolift Pc Board Replacement (If Applicable) - Henny Penny OFE-322 Technical Manual

2-23. AUTOLIFT
TRANSFORMER
REPLACEMENT
(if applicable)
2-24. AUTOLIFT PC BOARD
REPLACEMENT
(if applicable)
2-28
1. Remove electrical power supplied to unit.
To avoid electrical shock or property damage, move the
power switch to OFF and disconnect main circuit
breaker, or unplug cord at wall receptacle.
2. Remove control panel.
3. Label and remove wires from transformer.
4. Using a Phillips-head screwdriver, remove the screws securing
transformer to shroud and remove transformer from shroud.
5. Install new transformer in reverse order.
1. Remove electrical power supplied to unit.
To avoid electrical shock or property damage, move the
power switch to OFF and disconnect main circuit
breaker, or unplug cord at wall receptacle.
2. Remove control panel
3. Disconnect connectors from PC board.
Model OFE/OFG-321,322,323,324
606