1-3. TROUBLESHOOTING
(Continued)
PROBLEM
Shortening will not
drain from frypot
Filter motor runs
but pumps shortening
slowly
Filter switch on but
motor does not run
Motor hums but
will not pump
1-4
CAUSE
Drain valve clogged
with crumbs
Drain valve will not
open by turning
handle
Pump clogged
Filter line connection Tighten all filter line connections
loose
Solidified shortening Clear all filter lines of solidified shortening
in lines
Defective switch
Defective motor
Motor thermal
protector tripped
Clogged lines or
pump
Model OFE/OFG-321,322,323,324
CORRECTION
Open valve, force cleaning brush through
drain
Replace cotter pins in valve coupling
Remove pump cover and clean
Check/replace switch per Filter Switch
Section
Check/replace motor
Reset thermal switch on filter motor
Remove and clean pump and lines
Replace pump seal, rotor and rollers
203