Headset Memory Mode; Electronic Hookswitch - Polycom SOUNDPOINT IP SIP 3.2.1 User Manual

User Guide for the SoundPoint IP 32x/33x Desktop Phone

Headset Memory Mode

Electronic Hookswitch

2 - 6
This feature is especially useful for permanent or full-time headset users.
To permanently enable the Headset Memory Mode:
1. Press
2. Select Settings > Basic > Preferences > Headset > Headset Memory.
3. Use the or
4. Press to confirm your choice.
5. Press
Repeat steps 1 to 4 to select Disabled and turn Headset Memory Mode off.
To activate Headset Memory Mode:
>>
Press twice.
Pressing
the your headset automatically.
This feature enables electronic hookswitch support.
For information on supported headsets to provide electronic hookswitch features for
placing, answering, and ending calls, go to
enter "Headset Compatibility List" in the Knowledge Base text box or contact your
system administrator.
To select a headset that supports electronic hookswitch:
1. Press
2. Select Settings > Basic > Preferences > Headset > Analog Headset
Mode.
.
to select Enabled.
or repeatedly to return to the idle display.
or Answer soft key to receive a call will now connect to
www.polycom.com/support/voice
.
and