Set Up A Conference (Telephone Meeting); Forward Calls To A Co-Worker Or Voice Mail; To Set Up A Telephone Meeting - NEC DSX User Manual

Super display telephone
Hide thumbs Also See for DSX:
Table of Contents

Advertisement

Set Up A Conference (Telephone Meeting)

To set up a telephone meeting:

1. Place or answer your first call.
2. Press
.
CONF
3. Place or answer your next call.
4. Press
CONF
Repeat steps 2 through 4 to add additional callers to your Conference.
You can add either Intercom or outside callers.
If you hear an error tone after trying to add another party, your Conference is full.
To place a Conference on Hold, press

Forward Calls To A Co-Worker or Voice Mail

To forward (reroute) your calls to a co-worker or voice mail:
1. While idle, push Menu + Call Forward.
2. For the Call Forwarding Type , push one of the following:
Immediate for Call Forwarding Immediate.
Ö
Ring/No Ans for Call Forwarding when Not Answered.
Ö
Busy/No Ans for Call Forwarding when Busy or Not Answered.
Ö
Off-Premisefor Call Forwarding Off Premises. See the
Ö
Ans Machinefor Answering Machine Emulation. See the
Ö
Message for Selectable Display Messaging. See the
Ö
None to cancel Call Forwarding.
3. For the Call Forwarding Destination , do one of the following:
Dial a co-worker's extension number.
Dial
for the operator.
0
Press
V-MAIL
4. For the Call Forwarding Mode, do one of the following:
Push All to forward all calls.
Ö Push Line Only to forward j u st outside calls.
Ö Call Forwarding will only forward outside calls that directly
transferred from a co-worker or from your Automated Attendan
again to set up the Conference.
to forward your calls to your mailbox.
. To reinstate the Conference, press
HOLD
Telephone Feature Handbook
IntraMail Feature Handbook
Telephone Feature Handbook
.
CONF
for more.
for more.
for more.
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents