Installing And Using a Headset
To install an optional headset:
1. Plug the headset cord into the headset jack on the
bottom of the telephone.
2. The headset cord routes through the upper channel on
the right side of the telephone base.
To set up a headset Feature Key:
1. Dial
#KP (#57
2. Press the Feature Key you want to assign +
3. Press
INTERCOM
INTERCOM
4. Press a
VOLUME
5. Press
HOLD
To turn the headset mode on and off:
1. Press your Headset Feature Key.
The headset key is on while in the headset mode; off while in the normal handset mode.
You can optionally dial
To use your headset:
1. While in the headset mode, you can do the following:
Press a line key to place or answer an outside call.
Press
While on a call, press
2. Keeping the above three things in mind, process calls normally using the convenience of a headset.
12
).
.
flashes (red).
key until you see
+
twice to exit.
SPEAKER
to turn the headset mode on and off.
#HS
to dial a co-worker on the Intercom.
INTERCOM
SPEAKER
.
H OLD
.
HEADSET
to hang up.