Advertisement
ASSEMBLY INSTRUCTIONS
Tools Needed:
Pencil, hammer, spirit level, screwdriver, power drill and drill bits.
A wall mounting bracket is provided with the heater, which has been specifically designed to
allow this product to be attached to a wall or ceiling. Before drilling the holes for the wall or
ceiling mount, check that the surface is solid and that there are no hidden water pipes or
electric wires. The heater must be installed no less than 40cm from any side walls and no less
than 180cm from the floor.
Important: Ensure that the supply cable is well secured and that it does not come into contact
with the reflector of the heater or trail into the heated area of the appliance. The supply cable
can be fixed securely to the metal mounting bracket behind the heater with plastic zip ties.
Advertisement
