Standby Mode; Advanced Features - Dualit Espress-auto Coffee & Tea Machine Instruction Manual & Guarantee

STANDBY MODE

1 STANDBY 2
If the machine is left idle Press button 'ON'. The
for 30 minutes, it will enter Auto Dosing Buttons will
standby mode. The Auto flash. The Thermobloc is
Dosing Buttons illumination now heating the water.
will turn off along with the
Thermobloc Heater, to save
energy.

ADVANCED FEATURES

AUTO START
2
The Auto Start feature
allows you to pre-select
your dose. Once heated up
it will automatically dispense
your drink. If you like your
drink extra hot, prime
before use (see page 10).
1 Set the power switch to
SET UP HOLDER
'ON'. The lights will flash.
Select your prefered coffee or
Press the desired Auto
tea and attach Filter or NX
®
Dosing Button. The selected
Holder (see page 16).
button will continue to flash.
TURN ON 3 WAIT 40 SECONDS
The Auto Dosing Buttons
will turn solid once the
temperature is correct for
extraction.
SELECT AUTO 3 AUTO START
DOSING
The light will go solid
once the Thermobloc is
at the correct operating
temperature and
automatically dispense
coffee or tea.
20
DOSING
1
MEMORY
The Auto Dosing Buttons
can be programmed to fill
your desired cup size.
Press & hold the relevant Auto
Dosing Button until the Pump
starts (approx 5 seconds).The
machine will start to dispense.
Press the same button again
when the desired amount of
beverage has been dispensed.
TEMPERATURE
1
BOOST
The temperature boost
feature allows you to
increase or decrease the
temperature of the Auto
Dosing Buttons. Tea settings
are hotter than coffee
settings. For the coffee
buttons, each light indicates
an increment of 3 C, and for
°
tea each light indicates an
Ensure the machine is
increment of 5 ° C.
switched on and the
Auto Dosing Buttons are
illuminated, but not flashing.
Hold down your chosen Auto
Dosing Button and Steam
Button for 5 seconds and
release.
2
DISPENSE SAVE
Your preference is now
saved. The machine
remembers this dispense
volume, so the next time
the button is pressed the
same amount of beverage is
dispensed.
TURN ON 2 COOLEST
TEMPERATURE
The flashing button
indicates the previously
set temperature. One light
flashing indicates it is set to
the coolest temperature.
21