Ko Propo EX-10 Eurus Instruction Manual page 9

Changing the RF Module and Crystals
Remove the RF module and replace them as required.
When removing the RF module, push the right and left claws.
Please exchange modules to change frequency band
(2.4GHz,27MHz,40MHz).
Turn off the power of this unit when Changing the RF Module
Coution!
and Crystals
Coution!
Please remove the rubber cap of the main body antenna, install,
and use the antenna (optional) when you use 27MHz and 40MHz.
Coution!
Please read the handling manual of the module attachment well
when you use it.
Notes on installing receiver (anti-noise measures)
Locate antenna cable as far away from noise source!
Be careful Be careful
of noise! of noise!
Assume that all areas where large currents are flowing
are generating noise! Locate antenna cables and
receiver as far away from the motor, ESC, silicone cords
as possible. (Materials such as metal or carbon chassis
also conduct noise)
R/C model is controlled by radio wave.
Therefore,anti-noise measures are the most important
factor. Take measures to ensure optimum performance
of your R/C model and driving technique.
Carbon chassis
receiver
ESC
Battery
Silicone cords
RF Module
motor
11