Ko Propo EX-10 Eurus Instruction Manual page 4

Danger
!
Prohibited matters
Danger
!
Enfoecement matters
Danger
!
Prohibited matters
Danger
!
Enfoecement matters
Danger
!
Enfoecement matters
Danger
!
Enfoecement matters
6
●Do not allow any plastic parts to come in contact with fuel and exhaust.
Doing so causes risk of damage.
●Be sure to confirm that the model memory is matched to the models currently running.
Not doing so may cause the model to run out of control.
●When you make functional changes, be sure to stop the engine or disconnect the motor
lead wire.
●Do not touch the engine, motor, ESC where heat is generated.
May result in burning.
●Always turn on the switch on the transmitter first, followed by the receiver. When turning
off the switch, always turn off the receiver first, followed by the transmitter.
If you don't follow the correct order, the receiver may get interference.
●Altering the transmission module is inhibited by law and is subjected to penal code
violations. Resolution remodelling of all products may result in the cause of a short and
other accidents. In addition, if this product is altered we will refuse repair service.
●Please do not use this product inside an airplane, hospital, near any automatic control
equipment, medical electrical machinery and apparatus such as fire alarms.
In addition with respect to the law, if this product effects other radio equipment and
electronic equipment, use must be discontinued at once.
Notes After Driving (sailing)
●In the case of an electric-powered car, be sure to disconnect the nicad battery afterwards.
It may cause fire or the model to run out of control in case of the switch being left on.
●When storing the transmitter, batteries, and models, be sure to keep them out of the
reach of children.
It may result in damage and/or bodily injury from the chemicals.
●Be sure to disconnect the battery from the transmitter when not in use for a long time.
It may damage the transmitter if you leave the battery in the transmitter for a long time.
●Do not store the transmitter in the following places.
1,Extremely hot or cold places (+40, -10,).
2,Direct sunshine.
3,Places with high humidity.
4,Dusty places.
If you store the unit under these circumstances, it may result in misoperation or damage
to the unit.