How To Insert Batteries - Ko Propo EX-10 Eurus Instruction Manual

PREPARATION FOR USING THIS UNIT

How To Insert Batteries

1.
Pressing in the direction of the arrow of(1).
while pushing the part in the arrow of (2).
2.
(1)The direction is matched to the display of the plus or minus of
the dry battery box, and eight AA size batteries are put.
(2)The direction of the terminal of the dry battery box and the
terminal of the transmitter is matched and it pushes it into the
interior.
(3)The battery cover is closed.
Coution!
Do not use AA size Ni-cd or NiMH batteries.
The inside of the transmitter corrodes by generating gases
when charging it.
Battery pack (option)
Rechargeable Ni-MH battery pack.
[How To Insert Batteries
(1)The connector is inserted noting the direction as shown in
figure.
(2)Insert battery pack and close the cover.
(3)Be careful not to trap the cord.
Please attach included sponge to the battery lid when the battery pack is
used.
Coution!
Be careful to the polarity of the connector.
Coution!
Do not use it excluding the battery made of our company.
[About Charging (only for battery packs)]
Connect AC Mains charger as shown in figure.
The charging time from flat condition is 14-16 hrs for AC Mains charger.
Coution! Do not charge when dry cell batteries are used.
If the charge plug is inserted, the power supply of the
Note!
transmitter is turned off.
10
Transmitter(bottom)
]
Battery Box
AA size batteries
the polarity of the connector
Battery Pack
Battery Cover
Contact
8pcs
Be careful to
Not in use
Charger