AEG Protect C.1000 Operating Instructions Manual page 45

Description Adjustable parameters
Auto bypass [enabled], [disabled]
"enabled" means UPS will have
bypass output when utility power on.
"disabled" means UPS will not have
bypass output when power on but
could get bypass output when UPS is
fault or overload.
Start without [enabled], [disabled]
battery Setting "active" means: the UPS can
be started without an inserted battery
system.
Clear
The number after "Total events" shows
Event
how many events are currently stored
Log
in the log.
Press the "ENTER" button for one
second to reset the event count to
zero and clear the log.
LCD Contrast [-5], [-4], ...[-1], [0], [+1], ...[+4], [+5] 0
Restore Factory [no], [yes]
Settings Setting only available in
UPS stand-by mode.
Restoring the factory settings:
 Returns all user-configurable
EEPROM settings to default
factory settings
 Resets all pending on/off
commands
 Clears the Event Log and resets all
time stamps
 Resets the battery test status
 Initiates the Self Diagnostics test
The "Restore Factory Settings" process is completed after the UPS was
switched off completely. Wait until the fans stopped to allow the UPS
internal EEPROM overwriting.
45
Presetting
enabled
disabled
no