Event Log - AEG Protect C.1000 Operating Instructions Manual

38

7.3.2 EVENT LOG

Up to 50 events are stored in the internal non-volatile event memory in
the UPS. The last event that occurred is the first on the list, followed by
other previous events. Similar to the messages and alarms, each event
is shown in its own window.
An event is indicated along with the date and time, followed by a
description in plain text. The numerical code facilitates error analysis and
other procedures in dealing with the event that has occurred (also see
Chapter 9.1.1 on pg. 49.). In the lower right-hand corner of the display,
you will find the total number of events already stored as well as your
position when scrolling through the window. "1/..." indicates the most
recent, last stored event (= starting position when accessed).
If there are no events stored or if the event memory has been deleted
(also see Chapter 7.3.6 on pg. 45, the following message will appear:
"No events in log".
Accessing the event log
Access the event log by pressing "ESC" to go to the main menu and
then pressing "▲" or "▼" to go to the "Event log" menu item (line
appears highlighted) and then press "ENTER" (basis / starting point is
the UPS status display). Return to the UPS status display by pressing
"ESC" again (or automatically after 5 minutes if no other keys are
pressed).