Lionel Alco PA-1 Owner's Manual

Lionel Alco PA-1 Owner's Manual

Diesel locomotive
Hide thumbs Also See for Alco PA-1:

Advertisement

Quick Links

71-8961-250
08/99
LIONEL
Alco PA-1
diesel locomotive
Owner's Manual
featuring

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Alco PA-1 and is the answer not in the manual?

Questions and answers

Summary of Contents for Lionel Alco PA-1

  • Page 1 71-8961-250 08/99 LIONEL Alco PA-1 diesel locomotive Owner’s Manual featuring...
  • Page 2: Table Of Contents

    Lionel the hood, the Lionel Alco PA-1 is ready for TrainMaster Command-equipped Alco PA-1 duty on your model railroad. Experience the diesel locomotive. From the crisp detail and superiority of today’s Lionel.
  • Page 3: Transformer Operations

    (nonCommand) railroad, the Alco PA-1’s headlight will illuminate. At this point, the Alco PA-1 is in neutral. (This occurs when placing the Alco PA-1 on your railroad for the first time. Thereafter, it starts in forward after every three-second power interrupt.)
  • Page 4: Locking Your Alco Pa-1 Into A Single Operational State

    (rear) button on your CAB-1 remote YourPA-1’s Electrocouplers are not designed to be opened manually. Note! Locking your Alco PA-1 into a single operational state o select a single operational state for direction, then slow it down without stop- your Lionel Alco PA-1 (example: forward ping.
  • Page 5: Installing The Lionel No. 610-5906-001 Sound Activation Button

    (for horn) Lionel no. 610-5906-001 sound activation button (for bell) The no. 610-5906-001 sound activation button (available separately) works with Note! any Lionel AC transformer except no. 6-4690 Type MW. Transformers made by other manufacturers may not be compatible with Signalsounds.
  • Page 6: Trainmaster Commandtm Operations

    • Make sure track power is OFF before placing it on track. • Make sure your Lionel Command Base is ON and its communications wire is connected to the COMMON post on your Lionel transformer or the U on any of your installed PowerMasters.
  • Page 7: Running Your Alco Pa-1 In The Trainmaster Command Environment

    TrainMaster Command operations Running your Alco PA-1 in the TrainMaster Command environment our Command-equipped Alco PA-1 comes factory-pro- Example address Locomotive #1 grammed with an ID# of “1.” To get your Alco PA-1 in action, set PowerMasters set to CMD or traditional...
  • Page 8: Cab-1 Numeric Keypad Commands For Your Alco

    (until you press any top-row SignalSounds in bold italic. button like SW, ACC, RTE, TR, or ENG). The Stops and resets the Alco PA-1. Resets the Alco PA-1’s direction to FORWARD. Horn blows. Turns side marker/interior lights off. Turns side marker/interior lights on.
  • Page 9: Assigning Your Alco Pa-1 A New Id

    Place the Alco PA-1 on track Turn the Command Base ON and place the Alco PA-1 on track. Power up, then set the Alco PowerMasters set to CMD or PA-1’s reverse unit control switch to OFF (see traditional power supplies ON FULL the illustration).
  • Page 10 Maintaining and servicing your Alco PA-1 Replacing your Alco PA-1’s lamps our Alco PA-1 is illuminated by two 14- Locate the assembly containing the expired volt lamps. During the course of normal lamp (.see illustrations below). It’s located in operation, they may require replacement.
  • Page 11: Maintaining And Servicing Your Alco

    Maintaining and servicing your Alco PA-1 Lubricating your Alco PA-1 elp your Lionel Alco PA-1 lead a long and grease or oil on the Alco PA-1’s wheels or your productive life on your railroad by main- track. taining it properly.
  • Page 12: Limited Warranty/Lionel Service

    Website @ www.Lionel.com consumer-purchaser, for one year against original If you prefer to send it back to Lionel L.L.C. for defects in materials or workmanship when pur- factory repair, you must first call 810-949-4100 or chased through an authorized Lionel merchant.

This manual is also suitable for:

Alco pa-1 diesel locomotive

Table of Contents