AudioCodes Mediant 2000 System User Manual page 319

SIP User's Manual
Table 6-12: Number Manipulation and Routing Parameters
ini File Field Name
Web Parameter Name
TrunkGroupSettings
AddTrunkGroupAsPrefix
AddPortAsPrefix
ReplaceEmptyDstWithPor
tNumber
CopyDestOnEmptySource
AddNPIandTON2CallingN
umber
AddNPIandTON2CalledNu
mber
UseSourceNumberAsDisp
layName
Version 5.2
Valid Range and Description
Defines rules for port allocation for specific Trunk Groups. If no rule
exists, the global rule defined by ChannelSelectMode applies.
Format for this ini file table parameter:
[TrunkGroupSettings]
FORMAT TrunkGroupSettings_Index =
TrunkGroupSettings_TrunkGroupId,
TrunkGroupSettings_ChannelSelectMode,
TrunkGroupSettings_RegistrationMode,
TrunkGroupSettings_GatewayName;
[\TrunkGroupSettings]
Where,
TrunkGroupID = Trunk Group ID number.
ChannelSelectMode = Channel select mode for the Trunk Group.
Available values are identical to those defined by the
ChannelSelectMode parameter.
RegistrationMode = Registration mode for the Trunk Group (Per
Endpoint [0], Per Gateway [1], or Do Not Register [4]). If not
configured [-1], the value of AuthenticationMode is used.
GatewayName = 'sipgatewayname' used as a hostname in the From
header in INVITE and REGISTER messages. If not configured, the
'sipgatewayname' parameter is used.
For example:
[TrunkGroupSettings]
TrunkGroupSettings 0 = 9,0,0,$$;
[\TrunkGroupSettings]
For a description on ini file parameter tables, refer to 'Structure of ini
File Parameter Tables' on page 269.
For configuring Trunk group settings using the Embedded Web Server,
refer to Configuring Trunk Group Settings on page 140.
For a description of this parameter, refer to 'General Parameters' on
page 120.
For a description of this parameter, refer to 'General Parameters' on
page 120.
For a description of this parameter, refer to 'General Parameters' on
page 120.
[0] = Leave Source Number empty (default).
[1] = If the Source Number of an incoming Tel to IP call is empty, the
Destination Number is copied to the Source Number.
For a description of this parameter, refer to 'General Parameters' on
page 120.
For a description of this parameter, refer to 'General Parameters' on
page 120.
For a description of this parameter, refer to 'General Parameters' on
page 120.
319
6. ini File Configuration
September 2007