6.5.8
Media Server Parameters
ini File Field Name
Web Parameter Name
AMRCoderHeaderForm
at
EnableAGC
AGCGainSlope
AGCRedirection
AGCTargetEnergy
6.5.9
Voice Mail Parameters
For detailed information on the Voice Mail (VM) application, refer to the CPE Configuration
Guide for Voice Mail.
ini File Field Name
Web Parameter Name
VoiceMailInterface
SubscriptionMode
SMDI
SMDITimeOut
LineTransferMode
WaitForDialTime
MWIOnCode
SIP User's Manual
Table 6-8: Media Server Configuration Parameters
Determines the format of the AMR header.
[0] = Non-standard multiple frames packing in a single RTP frame.
Each frame has a CMR and TOC header.
[1] = Reserved.
[2] = AMR Header according to RFC 3267 Octet Aligned header format.
[3] = AMR is passed using the AMR IF2 format.
For a description of this parameter, refer to 'Configuring the IPmedia
Settings' on page 176.
For a description of this parameter, refer to 'Configuring the IPmedia
Settings' on page 176.
For a description of this parameter, refer to 'Configuring the IPmedia
Settings' on page 176.
For a description of this parameter, refer to 'Configuring the IPmedia
Settings' on page 176.
Table 6-9: Voice Mail Configuration Parameters
For a description of this parameter, refer to 'Configuring the Voice Mail
(VM) Parameters' on page 149.
For a description of this parameter, refer to 'Configuring the Voice Mail
(VM) Parameters' on page 149.
For a description of this parameter, refer to Configuring the Voice Mail
(VM) Parameters on page 149.
For a description of this parameter, refer to Configuring the Voice Mail
(VM) Parameters on page 149.
For a description of this parameter, refer to 'Configuring the Voice Mail
(VM) Parameters' on page 149.
For a description of this parameter, refer to 'Configuring the Voice Mail
(VM) Parameters' on page 149.
For a description of this parameter, refer to 'Configuring the Voice Mail
(VM) Parameters' on page 149.
Mediant 2000 & TP-1610 & TP-260/UNI
Valid Range and Description
Valid Range and Description
306
Document #: LTRT-68806
Need help?
Do you have a question about the Mediant 2000 System and is the answer not in the manual?