Configuring The Application Settings; Figure 5-29: Application Settings Screen - AudioCodes Mediant 2000 System User Manual

SIP User's Manual
5.6.2

Configuring the Application Settings

The 'Application Settings' screen is used for configuring various application parameters
(e.g., for Telnet).
To configure the Application Settings parameters, take these 4
steps:
Open the 'Application Settings' screen (Advanced Configuration menu > Network
1.
Settings > Application Settings option).
Configure the Application Settings according to the table below.
2.
Click the Submit button to save your changes.
3.
To save the changes to flash memory, refer to 'Saving Configuration' on page 256.
4.
Version 5.2

Figure 5-29: Application Settings Screen

157
5. Web-based Management
September 2007