User Commands; User Add Command - Equinox Systems Equinox Console Manager CCM4850 CCM4850 CCM4850 Installer/User Manual

User Commands

The User command has several forms, as listed in Table 5.32.
Table 5.32: User Command Summary
Command
User Add
User Delete
User Logout
User Set
User Unlock

User Add command

The User Add command adds a new user to the CCM user database. The user database holds a
maximum of 64 user definitions. For more information, see Managing User Accounts on page 20
and Access rights and levels on page 21.
Access right: USER
Access level: ADMIN or APPLIANCEADMIN
Syntax
USER ADD <username> [PASSWORD=<pwd>] [SSHKEY=<keyfile>] [FTPIP=<ftpadd>]
[KEY=<sshkey>] [ACCESS=<access>]
Table 5.33: User Add Command
Parameter
<username>
PASSWORD=<pwd>
SSHKEY=<keyfile>
FTPIP=<ftpadd>
KEY=<sshkey>
Description
Adds a new user to the user database.
Deletes a user from the user database.
Terminates a user's active session.
Changes a user's configuration information.
Unlocks a locked-out user.
Description
3-16 alphanumeric character username. Usernames are case sensitive.
3-16 alphanumeric character password. Passwords are case sensitive.
Name of uuencoded public key file on an FTP server. The maximum file size that
may be received is 4K bytes. If this parameter is specified, you must also specify the
FTPIP parameter.
FTP server's IP address. If this parameter is specified, you must also specify the
SSHKEY parameter.
Uuencoded SSH key.
Chapter 5: CCM Appliance Commands 65