Table of Contents
Advertisement
60
CCM4850 Installer/User Guide
Table 5.24: Show Port Command Display Fields (Continued)
Field
Power
Toggle **
Power Signal **
Logical name **
User *
Level *
Access *
Duration *
* Displayed only when the command specifies a single port that is currently being accessed.
** Displayed only when the command specifies a single port that is not being accessed.
Show Port Alert command
The Show Port Alert command displays a port's alert strings.
Access right: SMON
Access level: ADMIN or APPLIANCEADMIN
Syntax
SHOW PORT <port> ALERT
Table 5.25: Show Port Alert Command Parameter
Parameter
<port>
Show Server command
The Show Server command displays CCM appliance configuration information and statistics.
Access right: SMON
Access level: ADMIN or APPLIANCEADMIN
Syntax
SHOW SERVER
Content
Device power status, if monitoring is enabled. ON indicates the device is on, OFF
indicates the device is off. If monitoring is disabled, this field is blank.
Toggle value (from Port Set command).
Signal and state being monitored for device power status (from Port Set command).
Port name assigned with the Port Set command or the default name (last three
octets of MAC address plus the port number).
Username (from User Add command).
User's access level (from User Add and User Set Access commands).
User's access rights (from User Add and User Set Access commands).
Duration of user's session.
Description
Port number in the range 1-48.
Advertisement
Table of Contents
