Quit Command; Resume Command; Server Commands - Equinox Systems Equinox Console Manager CCM4850 CCM4850 CCM4850 Installer/User Manual

48 CCM4850 Installer/User Guide

Quit Command

The Quit command terminates the current CCM appliance session and terminates your Telnet
connection to the unit.
Access right: none needed
Access level: all
Syntax
QUIT

Resume Command

The Resume command exits the CLI and resumes your connection to the attached serial device.
The history buffer contains any data received while you were in CLI mode.
Access right: none needed
Access level: all
Syntax
RESUME

Server Commands

The Server command has several forms, as listed in Table 5.9.
Table 5.9: Server Command Summary
Command
Server CLI
Server FLASH
Server PPP
Server RADIUS
Server Reboot
Server Security
Server Set
Server SNMP
Server SNMP Community
Server SNMP Manager
Description
Specifies the console port type, CLI access character, modem initialization
string, port history mode operations and port time-out value. It also enables/
disables device connection from the console port.
Updates the unit's FLASH.
Enables/disables PPP connections to the console port.
Specifies RADIUS server parameters.
Reboots the unit.
Specifies user authentication method, enables/disables security lock-out and
enables/disables connection methods.
Changes the CCM appliance network configuration.
Enables/disables UDP port 161 SNMP processing.
Defines read, write and trap SNMP community strings.
Defines/deletes SNMP management entities.