Table of Contents
Advertisement
Table 5.26: Show Server Command Display Fields
Field
Server
Mask
Gateway
Up Time
MAC
S/N
Port
Username
Duration
Socket
From Socket
IP Input and Output
TCP
UDP
BOOT
APP
Show Server CLI command
The Show Server CLI command displays the serial CLI settings.
Access right: SMON
Access level: ADMIN or APPLIANCEADMIN
Syntax
SHOW SERVER CLI
Table 5.27: Show Server CLI Command Display Fields
Field
CLI Port
Access Character
Content
IP address (from initial configuration or Server Set command).
Subnet mask (from initial configuration or Server Set command).
Gateway IP address (from initial configuration or Server Set command).
Days, hours, minutes and seconds since unit was rebooted.
Ethernet MAC address.
Serial number.
Port number.
Username (from User Add command).
Duration of session.
Telnet socket number.
Telnet client IP address with socket number in parentheses.
Network IP statistics, including number of packets delivered, discarded
and fragments.
Network TCP statistics, including in segs, out segs, errors and retransmissions.
Network UDP statistics, including in, out, errors and no port events.
BIOS/Bootstrap version, date and time.
Application version that is running, plus its date and time.
Contents
Console port terminal type.
Control character used to access the CLI.
Chapter 5: CCM Appliance Commands
61
Advertisement
Table of Contents
