Spc Command; User Commands - Equinox Systems Equinox Console Manager CCM1640 CCM1640 CCM1640 Installer/User Manual

A Show User All command display includes the information in the following table.
Show User All Command Display Fields
Field Contents
User Username.
Pass YES if user has a password defi ned, NO if not.
Key YES if user has an SSH key defi ned, NO if not.
Lock YES if user is locked-out, NO if not.
Level User's access level. If a level was not confi gured, access rights
determine the level:
Users with SCON access => APPLIANCEADMIN.
Users with USER but not SCON => ADMIN.
Otherwise, USER level is assigned..
Access User's access rights.

SPC Command

The SPC command is reserved for future functionality

User Commands

The User command has several forms, as listed in the following table.
User Command Summary
Command Description
User Add Adds a new user to the CCM user database.
User Delete Deletes a user from the CCM user database.
User Logout Terminates a user's active CCM session.
User Set Changes a user's confi guration information.
User Unlock Unlocks a locked-out user.
User Add command
The User Add command adds a new user to the CCM user database. The CCM
user database holds a maximum of 64 user definitions. For more information,
see Managing Users, Connecting to devices using SSH and Access rights and
levels in Chapter 3.
Access right: USER
Access level: ADMIN or APPLIANCEADMIN
Chapter 5: CCM Commands
.
77