Table of Contents
Advertisement
CHAPTER
3
Overview
The CCM console management appliance and its ports are easily configured and managed to meet
your requirements for device connection, user authentication, access control, power status
monitoring, port history information display and Simple Network Management Protocol (SNMP)
compliance for use with third party network management products.
Configuring Serial Port Settings
By default, ports are configured with the settings listed in Table 3.1.
Table 3.1: Default Port Settings
Parameter
Target device
Name
Baud rate
Bits per character
Parity
Stop bits
Flow control
Time-out
CLI access character
Power
Most of these settings are standard serial port operating characteristics.
The CLI access character parameter specifies how you access the CLI. For more information, see
CLI mode on page 19.
Operations
Value
Console
xx-xx-xx Pn (last 3 octets of MAC address plus the port number)
9600
8
None
1
None
15 minutes
Use Server CLI setting (^D)
None
11
Advertisement
Table of Contents
