Table of Contents
Advertisement
50
CCM4850 Installer/User Guide
Table 5.10: Server CLI Command Parameters (Continued)
Parameter
CONNECT=ON|OFF
HISTORY=HOLD|AUTO,
CLEAR|KEEP
MODEMINIT="<string>"
TIMEOUT=<time-out>
Server FLASH command
The Server FLASH command updates the CCM appliance program images in FLASH memory. You
may wish to use this command to update the program with new features or to install a later release.
There are two program images that you may update in the CCM appliance FLASH. The boot image
file (ccm50bt.img) contains the CCM appliance startup and self-test logic. The application image
(ccm50app.img) contains the program that provides CCM appliance functionality.
You will need a TFTP server. Download the latest FLASH image from the Equinox web site,
www.equinox.com, and save the image file to the appropriate directory on the TFTP server.
NOTE: Powering down a system in the middle of a boot FLASH update may render the unit inoperable. To
update the bootstrap, it is recommended that the unit be placed on a UPS under controlled conditions to avoid
interruption of the boot FLASH update process.
Access right: SCON
Access level: APPLIANCEADMIN
Description
Enables or disables the ability to use the Connect command from the console
port. When enabled, a console port user may use the Connect command to
establish a connection to the serial device attached to another CCM appliance
serial port. When disabled, you cannot use the Connect command from the
console port.
Default = ON
Port history file processing options during connection (Hold or Auto) and when a
session ends (Clear or Keep):
Hold
Upon connection you are informed of how much data is in the history
buffer, but the data is not displayed.
Auto
Upon connection you are informed of how much data is in the history
buffer, and it is then displayed.
Clear
The history buffer's content is cleared when a session ends.
Keep
The history buffer's content is retained when a session ends.
You cannot specify both Clear and Keep or both Hold and Auto.
Default = HOLD,CLEAR
Modem initialization string, enclosed in quotation marks. Must contain at least
ATV1 and S0=1.
Default = "" (no modem is attached to the console port)
Number of time-out minutes in the range 0-90. If no data is received or
transmitted during a Telnet session for the specified period, the session will time-
out. A zero value indicates no time-out. This value is used for any CCM port that
does not have a time-out value set with the Port Set command, during a Telnet
session to port 23 or an SSH session to port 22.
Default = 15 minutes
Advertisement
Table of Contents
