Spc Command - Equinox Systems Equinox Console Manager CCM4850 CCM4850 CCM4850 Installer/User Manual

64 CCM4850 Installer/User Guide
Table 5.30: Show User Command Display Fields
Field
User
Level
Access
Locked
Last Login
Port
Username
Duration
Socket
From Socket
A Show User All command display includes the information in Table 5.31.
Table 5.31: Show User All Command Display Fields
Field
User
Pass
Key
Lock
Level
Access

SPC Command

The SPC command is reserved for future functionality.
Contents
Username.
User's access level. If a level was not configured, access rights determine the level:
Users with SCON access => APPLIANCEADMIN.
Users with USER or PCON but not SCON => ADMIN.
Otherwise, USER level is assigned.
User's access rights.
YES if user is locked-out, NO if not.
System up time value when the user logged in.
Serial port to which user is connected.
Username.
Duration of user's session.
Telnet socket number.
Telnet client IP address and socket number.
Contents
Username.
YES if user has a password defined, NO if not.
YES if user has an SSH key defined, NO if not.
YES if user is locked-out, NO if not.
User's access level. If a level was not configured, access rights determine the level:
Users with SCON access => APPLIANCEADMIN.
Users with USER or PCON but not SCON => ADMIN.
Otherwise, USER level is assigned.
User's access rights.