User Unlock Command - Equinox Systems Equinox Console Manager CCM4850 CCM4850 CCM4850 Installer/User Manual

Network device avocent hardware manual
Table of Contents

Advertisement

68
CCM4850 Installer/User Guide
Table 5.36: User Set Command Parameters (Continued)
Parameter
KEY=<sshkey>
ACCESS=<access>
Examples
The following command sets the access rights for JohnDoe, enabling access to all ports with
configuration and monitoring access rights.
>user set JohnDoe access=pall,scon,smon
The following command removes the server configuration access right for JohnDoe, and leaves
other access rights intact.
> user set JohnDoe access=-SCON
The following command deletes the SSH key information for JohnDoe. The command will
complete successfully only if JohnDoe has a password configured in a previous User Add or User
Set command, and if there are other users with User access rights.
> user set key=""

User Unlock command

The User Unlock command unlocks a user who was previously locked-out. After this command
completes, the user will be able to attempt login authentication again.
Access right: USER
Access level: ADMIN (may unlock all except APPLIANCEADMIN) or APPLIANCEADMIN
Description
Uuencoded SSH key. To delete an SSH key (whether it was originally specified with
the SSHKEY and FTPIP parameters or with the KEY parameter), specify Key="".
Command and port access rights or level. You may specify multiple access rights,
separated by commas, or a level. If specifying access rights, you may use one of
three forms:
ACCESS=<access> to specify all access rights.
ACCESS=+<access> to specify only access rights to be added.
ACCESS=–<access> to specify only access rights to be deleted.
Valid values for access rights are:
P<n>
P<x-y>
PALL
USER
PCON
SCON
SMON
BREAK
Valid values for access levels are:
ADMIN
APPLIANCEADMIN
Default = PALL,SMON
Access to the specified port number.
Access to the specified range of ports.
Access to all ports.
User configuration access rights.
Port configuration access rights.
Configuration access rights.
Monitor access rights.
Can issue Port Break command.
PALL, USER, SMON, PCON and BREAK access rights.
PALL, USER, SCON, SMON, PCON and BREAK
access rights.

Advertisement

Table of Contents
loading

Table of Contents

Save PDF