Server Snmp Command; Server Snmp Community Command - Equinox Systems Equinox Console Manager CCM4850 CCM4850 CCM4850 Installer/User Manual

Server SNMP command

The Server SNMP command enables or disables SNMP UDP port 161 SNMP processing. When
you disable SNMP processing, you may still enable and disable traps with the Server SNMP
Trap command.
For more information, see Managing the CCM Appliance Using SNMP on page 28.
Access right: SCON
Access level: APPLIANCEADMIN
Syntax
SERVER SNMP ENABLE|DISABLE
Table 5.16: Server SNMP Command Parameter
Parameter
ENABLE|DISABLE

Server SNMP Community command

The Server SNMP Community command defines read, write and trap SNMP community strings.
Community names are case sensitive.
NOTE: The default community names are "public"; if you enable SNMP, you are encouraged to change the
community values to prevent access to the MIB.
For more information, see Managing the CCM Appliance Using SNMP on page 28.
Access right: SCON
Access level: APPLIANCEADMIN
Syntax
SERVER SNMP COMMUNITY [READCOMM=<name>] [WRITECOMM=<name>]
[TRAPCOMM=<name>]
Table 5.17: Server SNMP Community Command Parameters
Parameter
READCOMM=
WRITECOMM
TRAPCOMM=
Description
Enables or disables SNMP processing.
Default = Enabled
Description
1-64 alphanumeric character read community name.
name
< >
Default = public
1-64 alphanumeric character write community name.
name
=< >
Default = public
1-64 alphanumeric character trap community name. If you specify this parameter,
name the name must be different from the read and write community names.
< >
Default = public
Chapter 5: CCM Appliance Commands 55