Quit Command; Resume Command; Server Commands - Equinox Systems Equinox Console Manager CCM1640 CCM1640 CCM1640 Installer/User Manual

60
CCM840/1640 Installer/User Guide
Example
The following command sets a baud rate of 57600 and enables XON/XOFF
flow control on port 2.
> port 2 set baud=57600 flow=xonxof

Quit Command

The Quit command terminates the current CCM session and terminates your
Telnet connection to the CCM.
Access right: none needed
Access level: all
Syntax
QUIT

Resume Command

The Resume command exits the CLI and resumes your connection to the
attached serial device. The history buffer contains any data received while you
were in CLI mode.
Access right: none needed
Access level: all
Syntax
RESUME

Server Commands

The Server command has several forms.
Server Command Summary
Command
Server CLI
Server FLASH
Server PPP
Server RADIUS
Server Reboot
Description
Specifi es the serial CLI port, type and access character;
modem initialization string; port history mode operations
and port time-out value. It also enables/disables device
connection from the CLI port.
Updates the CCM program FLASH.
Enables/disables PPP connections to the serial CLI port.
Specifi es RADIUS parameters.
Reboots the CCM.