6.3.2 Installing The Cradle And Cradle Mounting Plate
Adaptor Plate PN 1008444
First, the 8525 G2/8530 G2 must be attached to the cradle (Figure 6.2 on page 169).
To do this:
•
Place the terminal in the cradle so that the ports face away from the quick
release fasteners.
•
Match the side screw holes on the 8525 G2/8530 G2 with the appropriate
pairs of holes on the cradle and screw them together. The choice of holes
determines the angle at which the terminal tilts.
Quick Release
Fasteners
Figure 6.2 Mounting Cradle And Quick Release
Installing The Cradle And Cradle Mounting Plate
Mounting Kit PN 1008424
Cradle Mounting Plate and Quick Release
PN 1080363 and PN 17529
Figure 6.1 Quick Release Mount Installed
Screw Holes
Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual
Chapter 6: Peripheral Devices & Accessories
Adaptor Plate
T abs
169