Upc A Settings; Upc E Settings - Psion Teklogix Vehicle-Mount Computer 8525 G2 User Manual

Chapter 5: Configuration
Scanner Properties Setup
Addendum
Important:
Refer to "Addendum" on page 144.
Prefix/Suffix Chars
See "Prefix/Suffix Chars" on page 144.

5.5.13.9 UPC A Settings

Enabled
Set this parameter to on to enable UPC A or off to disable it.
Include Number Sys
If this parameter is enabled (set to on), the number system digit is included with the
decoded bar code data.
Include Check
If this parameter is enabled (set to on), the check digit will be included with the
decoded bar code data.
Addendum
Important:
Refer to "Addendum" on page 144.
Prefix/Suffix Chars
See "Prefix/Suffix Chars" on page 144.

5.5.13.10 UPC E Settings

Enabled
Set this parameter to on to enable UPC E or off to disable it.
146 Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual
Before "Addendum" can take effect, the "Short Code" parameter
in the Options menu (see page 139) must be enabled (set to 'ON').
Before "Addendum" can take effect, the "Short Code" parameter
in the Options menu (see page 139) must be enabled (set to 'ON').