Psion Teklogix Vehicle-Mount Computer 8525 G2 User Manual page 185

Enabling Authentication TRAPS
Enabling Enable Authentication TRAPS allows authorization traps to be sent when
a failure is detected (e.g., an SNMP message received with a bad community name).
Adding A Destination
To add a new destination:
• Tap on the Add button.
• Type a destination in the text box provided, and press [ENTER].
Changing A Destination
To change an existing trap destination:
• Highlight the destination you want to alter in the Trap Destination tab, and
then tap on the Change button.
A dialog box like the one displayed when you add a destination is displayed.
• Make the changes to the destination, and tap on OK to save the changes.
SNMP (Simple Network Management Protocol) Setup
Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual
Chapter 5: Configuration
161