Linking An 8515 To An Ethernet Network; Network Access; 8515 Mounting Accessories: Installing The Ram Mounting Kit - Psion Teklogix Vehicle-Mount Computer 8515 User Manual

Chapter 6: Peripheral Devices & Accessories

Linking An 8515 To An Ethernet Network

6.3

Linking An 8515 To An Ethernet Network

A USB-Ethernet adaptor cable—model number WA4010-G1—is used to connect the 8515
to an Ethernet network.
Figure 6.1 USB-Ethernet Adaptor Cable
Ethernet Port
• Insert the adaptor's USB connector into the Host USB port on the 8515.
• Connect your network Ethernet cable to the Ethernet port on the adaptor cable.
6.3.1

Network Access

The 8515 automatically loads the appropriate drivers to communicate with the USB-Ether-
net converters.
Network Addressing
The host application uses standard TCP/IP protocol to name, locate, and communicate with
a specific 8515 on the network.
If a link is established between an 8515 and a host, the application on the host and on the
vehicle-mount must have a recovery mechanism in the event that the 8515 is disconnected,
interrupting the link.
6.4

8515 Mounting Accessories: Installing The RAM Mounting Kit

The 8515 is installed using an articulating RAM Mount (Model MT34XX – 4 in. or 12 in.
arm) secured to either a Vesa or circular base.
126 Psion Teklogix 8515 Vehicle-Mount Computer User Manual
USB
Connector