Chapter 5: Configuration
SNMP (Simple Network Management Protocol) Setup
Modifying A Community Setting
To modify an existing community:
•
Highlight the community you want to alter.
•
Tap on Change.
A Modify Community dialog box is displayed, listing the community
you highlighted.
•
Edit the Name and/or Rights, and press [ENTER] to save your changes.
Removing An Existing Community
•
Highlight the community you want to remove in the Communities tab and
then tap on the Remove button.
A Delete Confirmation screen is displayed.
•
To remove a community, tap on Yes, or
If you decide not to remove the community, tap on No.
5.5.14.3 Trap Destination Tab
A trap is an unsolicited report sent to SNMP Managers by the SNMP Agent running
on the managed node. This option allows you to define where the report will be sent.
160
Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual