Table of Contents
Advertisement
Chapter 5: Configuration
SNMP (Simple Network Management Protocol) Setup
5.5.14.2 Communities Tab
The Communities tab provides a means of limiting access to SNMP managed
devices to those SNMP Managers with matching "community names", as specified
by RFC 1157.
Enable SNMP
Enabling Enable SNMP allows the device to respond to SNMP queries and to send
Traps. After enabling this option and rebooting the device, the SNMP Agent will
automatically start up. To disable this feature, remove the check mark from the
check box.
Adding A Community
•
Tap on Add to add a new 'community'.
Name
The value assigned here is the name assigned by the network administrator to the set
of devices to which this managed node belongs.
Rights
This menu allows you to specify access – that is, 'Read-Only' or Read-Write'
Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual
159
Advertisement
Chapters
Table of Contents
