Table of Contents
Advertisement
56 Installing User Software on a Windows Computer
Modifying the configuration
You should edit the configuration whenever there is any change to your
iR C2100/2100S server or network, such as a server name or IP address. First
change the specific iR C2100/2100S Setup information before configuring
the connection.
T
O MODIFY THE CONFIGURATION
1. To edit information for the iR C2100/2100S in the list of available servers,
select the iR C2100/2100S by its nickname and click Modify.
2. Edit information in the Modify Server Settings dialog box as necessary, and
click OK when finished.
3. To add a new iR C2100/2100S to the list of available servers, click Add.
Configure the Add New Server dialog box as outlined in steps 3 through 5 in
the previous procedure.
4. To remove the iR C2100/2100S, select the iR C2100/2100S by its nickname,
and click Remove.
The nickname cannot be modified.
N
:
OTE
Configuring a connection for ColorWise Pro Tools
The following procedure describes configuring a connection for ColorWise
Pro Tools.
B
:
EFORE YOU BEGIN
•
Print the Configuration page from the Control Panel and note the IP Address
of the iR C2100/2100S.
You can also set up a Domain Name Server (DNS) for the IP address of the
iR C2100/2100S. See your Windows system documentation for information.
:
Advertisement
Table of Contents
