Table of Contents
Advertisement
9 Setting up PostScript printing with Windows 95/98
5. Click Spool Settings.
6. Select either "Spool print jobs so program finishes printing faster" or "Print
directly to the printer."
The selection you make depends on the action you took in step 3 on page 8:
• If you set the Port Timeout in Seconds to 10, you can select either option;
however, spooling is faster.
• If you set the Port Timeout in Seconds to 5, select "Print directly to the
printer."
7. Select "Disable bi-directional support for this printer" and click OK.
8. Click Apply.
You are now ready to print from your applications to the iR C2100/2100S
with the parallel port. To confirm the connection, print a test page.
9. Click the General tab.
10. Click Print Test Page and click OK.
11. The Job Notes window appears. Enter user and job identification information
for accounting purposes, or whatever information is required at your site,
and click OK.
If the test page prints successfully, you are ready to print from the computer.
Perform the following procedure in Windows 95 only if the LPT 1 port is not
currently set to ECP Printer Port.
T
O PREPARE THE PORT FOR PARALLEL PORT PRINTING
W
95:
IN
INDOWS
1. Click the Start button, choose Settings, and then choose Control Panel.
2. Double-click System.
Advertisement
Table of Contents
