Completing The Windows 95/98 Connection - Canon iRC2100 Getting Started

7 Setting up PostScript printing with Windows 95/98
6. If you would like your printer driver to display the printer's current default
settings when opened, check Update Fiery Driver When Opened.
The Update button does not function.
N :
OTE
7. Click OK.

Completing the Windows 95/98 connection

To print from Windows 95/98 you need to:
• Set up network servers, if any
• Set up the iR C2100/2100S to accept print jobs from your computer
• Configure a port on each Windows computer for the network
For this type of connection:
Parallel
IPX (Novell)
Completing the Windows 95/98 parallel port connection
Preparing a parallel port connection for Windows 95/98 requires specific
BIOS settings on your computer, and specific port and printer settings for
Windows 95/98. In addition, a change to one of the iR C2100/2100S Setup
settings may be required if you choose to spool files to the iR C2100/2100S
rather than print directly.
T R C2100/2100S
O PREPARE THE I
FOR PARALLEL PORT PRINTING
1. Connect the iR C2100/2100S to the parallel port on your computer.
For instructions, see the Configuration Guide.
2. In Network Setup>Port Setup>Parallel Port Setup, set Enable Parallel Port
to Yes.
For more information about iR C2100/2100S Setup, see the Configuration
Guide.
AND YOUR COMPUTER
:
See:
below
page 15