Table of Contents
Advertisement
13 Setting up PostScript printing with Windows 95/98
10. From the Manufacturers list, select "(Standard port types)." From the Models
list, select "ECP Printer Port" (not Printer Port). Click Next.
11. Click Yes in the Update Driver Warning dialog box.
12. Click Next.
Some files are copied.
13. Click Finish, then close the Printer Port Properties and System Properties
dialog boxes.
You must restart your computer in order to activate the new settings. After
Windows 98 restarts, you can complete the procedure, "To prepare the
printer for parallel port printing in Windows 95/98:" on page 8.
Completing the Windows 95/98 IPX/SPX or IPX (Novell) connection
If you are printing through a Novell server, the Novell network and file server
should be set up before you begin. The file server should be configured with a
print server and print connection for the iR C2100/2100S. For details see
your NetWare documentation and the Configuration Guide.
To print from Windows 95/98 computers over IPX (Novell), you must first
set up IPX/SPX protocols, and then configure the iR C2100/2100S by
choosing the IPX port type, and entering the settings for the port you use.
Advertisement
Table of Contents
