Preventing Accidental Activation - Siemens CX70 User Manual

of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)
left page (26)
26 Security
¢T¢
C
¢
Select function.
Change PIN2
(Display only if PIN 2 is available).
Proceed as with
Chg.phonecode
(Change phone code)
You define the phone code (4–8 dig-
its) when you call up a phone-code
protected function for the first time
(e.g.
Direct
for all phone-code protected func-
tions.
Following the third unsuccessful
attempt, access to the phone code
and the functions that use it is
denied. Contact the Siemens Service
(p. 149).
Clearing SIM card barring
If the PIN is entered incorrectly three
times, the SIM card is barred. Enter
the PUK (MASTER PIN) provided by
your service provider with the SIM
card in accordance with the instruc-
tions. If the PUK (MASTER PIN) has
been lost, please contact your serv-
ice provider.
¢
Security Codes
Change PIN.
call, p. 35). It is then valid
Preventing accidental
activation
Even if PIN use is deactivated (p. 25)
confirmation is required to switch on
the phone.
This prevents accidental activation
of the phone, e.g. when you are
carrying it in a bag or when you are
travelling in an aircraft.
Press down.
B
Press. The phone switches
C on.
§Cancel§ Press or take no action.
The phone does not
switch on.
Connecting to Windows
PCs
You can connect your phone using
IrDA or a data cable (accessories,
p. 151) to a Windows® PC. The
Windows® PC program MPM (Mobile
Phone Manager, p. 131) enables you
to backup data on your Windows®
PC and to synchronise the
Addressbook with Outlook®, Lotus
Notes™ and other Siemens phones
(as well as Gigaset). You can
download the Mobile Phone
Manager from the Internet at
www.siemens-mobile.com/cx70
®