Preventing Accidental Activation - Siemens ST60 Operating Instructions Manual

ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Press.
§Edit§
J
Enter PIN.
Confirm input.
§OK§
Press.
§Edit§
Confirm.
§OK§
Change PIN
You can change the PIN to any 4 to
8-digit number you find easier to
remember.
J
Enter current PIN.
Press.
§OK§
J
Enter new PIN.
§OK§
,
J
§OK§ Repeat new PIN.
,
Change PIN2
(Display only if PIN2 is available).
Proceed as with
Change
Chg. phonecode
The phone is supplied without a
phone code. You must therefore
determine this code the first time
you call up a function that requires
a phonecode (e.g. This SIM only,
p. 57).
Following the third incorrect attempt,
access to the phone code and the
functions that use it is denied. If this
happens please contact Siemens
Service (p. 72).
General instructions
PIN.
L
Clear SIM card barring
If the PIN is entered incorrectly three
times, the SIM card is barred. Enter
the PUK (MASTER PIN), provided by
your service provider with the SIM
card, according to instructions. If the
PUK (MASTER PIN) has been lost,
please contact your service provider.
Additional information
Keylock..............................................p. 55
Further security settings ....................p. 56
Preventing accidental
activation
Even if PIN entry is deactivated, con-
firmation is required to switch on the
phone.
This prevents the phone from being
switched on accidentally, e. g.,
when carried in a pocket or whilst
you are on an aircraft.
A
Hold down.
Press. The phone switches
§OK§
on.
13