of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)
left page (92)
When you make a call, your phone
number can be displayed on the
recipient's display (depending on the
To suppress this display, you can
enable the "Hide ID" mode for all sub-
sequent calls or just for the next call.
You may need to register separately
with your service provider for these
If you are registered for this service,
you can check whether it is set and
you can activate/deactivate it.
You can specify the conditions under
which calls should be diverted to
your mailbox or other numbers.
You can check the current divert sta-
tus for all conditions. After a short
pause, the current situation is trans-
mitted by the network and dis-
Display if status is
unknown (e.g. with a new
All set diversions are cleared.
Set up call divert (example)
The most common condition for call
divert is, for example:
(Includes the conditions
Busy, see below)
Select or enter the phone
number to which the calls
are to be diverted.
box phonenumbers, or
enter them if necessary.
Confirm. After a short
pause, the setting is con-
firmed by the network.
Use existing mail-