Function Tests
Engine start/on/off
Switch
•
Test Differential Lock Switch
Before engaging differential lock,
ensure drive/steer controller is in
neutral position.
1. On platform control console, push
d i f f e r e n t i a l l o c k s w i t c h f o r w a r d
"
" to the locked position and then
release.
Result: Differential light should turn on.
Differential lock should be engaged.
2. Pull differential lock switch backward
"
" to the unlocked position and then
release.
Result: Differential light should turn off.
Differential lock will disengage when
drive torque is released. Refer to
Section 3 for operation.
Page 38
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
WARNING
December 2007
contained in this operating manual and on the aerial platform.
Horn
Section 2 - Familiarization
Drive/Steer
Controller
SJ 46AJ