Visual & Maintenance Inspection
Overhead View
Drive Axle
Wheel/Tire
Assembly
•
Fuel Leaks
-
Ensure that there no fuel leaks.
Engine fuels are combustible. Inspect
the aerial platform in an open, well-
ventilated area away from heaters,
sparks and flames. Always have an
approved fire extinguisher within easy
-
Ensure fuel tank, shutoff valve, hoses and
fittings show no visible damage and no
evidence of fuel leakage.
2.3-7 Base
•
Turret Transportation Lock
-
Ensure turret transportation lock is
unlocked, there are no loose or missing
parts and there is no visible damage.
•
Drive Axle
-
Ensure drive axle is properly secured,
there are no loose or missing parts, all
fittings and hoses are properly tightened
and there is no evidence of hydraulic
leakage.
Page 24
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
Limit Switch
Rotary
Manifold
DANGER
reach.
December 2007
contained in this operating manual and on the aerial platform.
Tie Rod
Turret Rotation
Gear
Steer Cylinder
Assembly
•
Oscillating Cylinder Assembly
-
Ensure oscillating cylinder assembly is
properly secured, there are no loose
or missing parts, all fittings and hoses
are properly tightened and there is no
evidence of hydraulic leakage.
Oscillating axle is locked when aerial
platform is in work mode. Refer to
Figure 3-13.
•
Steer Cylinder Assembly
-
Ensure steer cylinder assembly is
properly secured, there are no loose
or missing parts, all fittings and hoses
are properly tightened and there is no
evidence of hydraulic leakage.
•
Tie Rod
-
Ensure there are no loose or missing
parts, tie rod end studs are locked and
there is no visible damage.
Section 2 - Familiarization
Oscillating
Cylinder
Assembly
NOTE
Axle Oscillation Diagram.
SJ 46AJ