Oce VarioStream 8000 User Manual page 13

All persons who work on or with the printing system must:
have read and understood the user guide before switching on the printing system
for the first time. If there are any points that are unclear, please ask your Océ
Service contact.
have the user guide available to them when using the system.
observe all instructions and information in the user guide and in this safety
information.
Printing System
Observe all warning and information signs on and in the printing system.
In emergency situations, the printing system should be switched off immediately
at the main switch.
Do not attempt to remove protective covers yourself and do not interfere with any
safety devices.
Keep the operating and maintenance areas around the printing system clear.
Make sure that no objects or liquids get inside the printing system.
Should the printing system emit any unusual or conspicuous noises or smells,
switch it off.
Do not obstruct the cooling ducts of the printing system.
Make sure that the climatic and environmental conditions in the printing
installation area are in line with specifications.
Always close all doors and covers with both hands and do not open them during
operation.
Never hold on to the moving paper during printing.
Consumables and Expendables
Always use an industrial vacuum cleaner with a grounded suction tube, rubber
nozzle and filter set for fine dust. For larger toner quantities, the industrial
vacuum cleaner must be explosion proof.
Keep all consumables for the printing system out of the reach of children and
separate from food and drink.
Observe the safety information for all consumables and expendables.
Transport
The printing system may only be transported by Service personnel or authorized
transport companies.
Installation
The printing system may only be assembled and installed by Service personnel.
The printing system must have a fixed connection or type B plug connection
(complying with VDE directives, EN 60950).
General Information
13