Arrow ED1012 B1 Owner's Manual & Assembly Instructions page 20

Step 7
SX20 ctr
(14)
The top frame pieces give rigidity to
the side walls and provide a surface
for attaching the gables which sup-
port the roof.
1
Fasten the door track assembly
(holes on top) behind the top of the
front corner posts using 1 screw in
each corner. See the gure.
2
Fasten the rear wall angle behind
the inside top of the rear posts using
2 screws in each post.
3
Fasten the side wall angles be-
hind the inside top of the side posts
using 2 screws in each corner. Side
wall angles overlap rear wall angle
in corners.
Parts Needed For
Top Frames
10395
9366
Wall Angles
Must Face
Inside
Building
20
Door Track Assembly (1)
Rear Wall Angle Assembly (1)
Side Wall Angle Assemblies (2)
Short Leg
on Top
10396
10395
Long Leg
On Top
Opening
Facing In
STEP
Short Leg
1
on Bottom
STEP
2