Arrow ED1012 B1 Owner's Manual & Assembly Instructions page 10

A10
Anchoring Down The Building
It is important that the entire oor frame be anchored after the building is erected.
Below are recommended ways of anchoring.
Arrow Anchoring Kit:
Recommended for use with any suggested base.
Contains: 4 Anchors with Cable, Clamps and
installation instruction.
Arrow Anchoring Kit:
Recommended for use with the concrete base.
Contains: Corner gussets, perimeter clips, hardware,
1/4" masonary drill bit and installation instruction.
Anchoring
(Model No. AK4 or 60298)
OVER THE BEAMS
AND INTO THE GROUND
(Model No. AK100 or 68383)
Anchoring into Wood/Post:
Use 1/4" (6 mm) Wood Screws. There are 1/4" (6 mm)
dia. holes provided in the frames for proper anchoring.
1.
Anchoring into Concrete:
1. For poured concrete slab or footing or patio blocks:
Use 1/4" x 2" (6 mm x 51 mm) Lag Screws.
2. For Anchor Post of Concrete poured after building is
erected: Use 1/4" x 6" (6 mm x 152 mm) Lag Screws.
1.
10
2.
2.