Web Setting; Network Setting; Ipc Configuration - Dahua MJHJ4P Quick Start Manual

2.2

WEB Setting

Users can configure the IP address of IPC and the IP address of NVR via WEB.

2.2.1 Network Setting

Select ''System Setting > Network Setting'', the system enter ''Network Setting'' interface, and users can
set IP address of NVR on this interface.

2.2.2 IPC Configuration

Select ''System Setting > Advanced Options > Remote Device'', system enter ''Remote Device Setting''
interface, and users can set IP address of IPC.
Auto Registration
Select ''Extended Configuration > Auto Registration'', the system enters "Auto Registration" interface.
Then it can configure "Server IP", "Port Number" and other parameters, after the device is registered to
the server, it can visit the device after the successful connection between client and server.
- 8 -